Daltonen Focusing on Separating Membrane Products and Fluid Technology Services.
DA-UF2860
|
DUF membrane assembly parameter table |
|||||||
|
Type |
DA-UF2860 | DA-UF2880 | Conditions of use | Filtering mode | External pressure type | ||
|
Size(mm)
|
a |
1860 |
2360 |
Maximum inlet pressure of a component |
≤0.3MPa |
||
|
b |
1630 |
2130 |
Normal operating pressure is recommended |
≤0.15MPa |
|||
|
c |
95 |
Maximum transmembrane pressure difference |
0.2MPa |
||||
|
d |
225 |
Operating temperature |
5-45℃ |
||||
|
e |
80 |
PH range when used |
2-11 |
||||
|
Performance parameter
|
Area(㎡) |
51 |
77 |
Pre-processing accuracy requirement |
≤150μm |
||
| Materials |
PVDF |
Maximum influent turbidity |
≤50NTUMaximum bearing300NTU |
||||
| Membrane aperture |
0.03μm |
Oil content of raw water |
≤2mg/L |
||||
| Hollow fiber inner/outer diameter |
0.7/1.4mm |
Maximum residual chlorine concentration in influent water |
200mg/L(Cleaning agent maximum residual chlorine concentration 5000mg/L)) |
||||
| Membrane shell material |
UPVC |
Filtration flux range |
40-80L/㎡.h |
||||
| Fiber bonding material | Epoxy resin | Operation mode | Full-flow filtration or cross-flow filtration | ||||
|
Filtering effect
|
Suspended matter＞2μm |
100% |
Gross weight outer box |
2860 45Kg |
2880 53Kg |
||
| Turbidity of water production |
≤0.2NTU |
191.5*38*36cm |
242.3*38*36cm |
||||
|
Water yield SDI |
≤3.0 |
||||||
| Guaranteed service life | 3-5 years (except for special water quality) | ||||||
|
The molecular weight is 6000-200000Dalton |
|||||||
For more information, please call the hotline 0755-66611508 or download the technical manual.
Product Message
Related Products
