Daltonen Focusing on Separating Membrane Products and Fluid Technology Services.
DA-HRFR400-ALL
Product Introduction
Daltonen Membrane HRFR series high desalination reverse osmosis membrane components are one of the highest desalination rate reverse osmosis membrane components, with a stable desalination rate of over 99.7%. In general industrial and water treatment applications, the use of a primary reverse osmosis system can achieve high-quality effluent quality. This series of 8-inch membrane components has an effective membrane area of over 37 square meters, which can achieve the expected system design and operating flux, and can meet higher water quality purification requirements at a lower cost. The HRFR high desalination and high pollution resistance series membrane components come in two sizes: 8-inch and 4-inch, mainly suitable for high pollution water sources such as electroplating wastewater, printing and dyeing wastewater, and coking wastewater.
Product advantages
· It can effectively reduce the energy consumption of membrane system operation and improve the economic efficiency of system operation
· Good pollution resistance and high pollution influent water quality
· 35mil special inlet channel, more resistant to pollution
Product size
|
Type |
Size A inch (mm) | Size B inch (mm) | Size C inch (mm) | Size D inch (mm) |
| DA-HRFR400-ALL | 40(1,016) | 1.125(29) | / | 7.9 (201) |
| DA-HRFR4040-ALL | 40(1,016) | 1.05(26.7) | 0.75(19) | 3.9(99) |
Product parameters
|
Model |
ModelEffective area Ft(㎡) | Stable boron removal rate(%) | Stable rejection rate（%） | Water yield gpd(m³/d) |
| DA-HRFR400-ALL | 400(37.2) | 99.75 | 99.4 | 11,500(44) |
| DA-HRFR4040-ALL | 85(7.9) | 99.75 | 99.4 | 2,050(7.8) |
Test conditions: inlet pressure 1.55 MPa (225 psi); The inlet temperature is 25 ℃ (77 ° F); Inlet water quality 2000 ppm NaCI; The pH value of the inlet water is 8; The recovery rate is 15%.
Instructions for use
| Maximum working pressure | 41 bar (600psi) | Continuous operation PH range | ph＜2-10 |
| Maximum operating temperature | 45°C (113°F) | Allowable free atmosphere content | ＜0.01ppm |
| Maximum inlet water SDI value | 5.0 | Flow range of a single membrane element | ±15% |
| Chemical cleaning PH range | PH 1-13 | Effective membrane area variation range | ±3% |
| Maximum pressure drop for a single membrane element | 1.2 bar (15psi) | Time to obtain stable desalting rate | Run continuously for 24h-48h |
For more information, please call the hotline 0755-66611508 or download the technical manual.
Product Message
Related Products
