DA-FRLE400-ADD
Product Introduction
Daltonen Membrane FRLE series reverse osmosis membrane components have strong anti pollution performance and low energy consumption performance, and are developed for treating highly biologically or organically polluted water sources. Its operating pressure is about 30% lower than that of ordinary reverse osmosis membrane components for desalination of brackish water, and the stable desalination rate can reach over 99.3%. The FRLE anti pollution and low energy consumption series membrane components come in two sizes: 8-inch and 4-inch, suitable for municipal water treatment.
Product advantages
· It can effectively reduce the energy consumption of membrane system operation and improve the economic efficiency of system operation
· Good pollution resistance and high pollution influent water quality
· 35mil special inlet channel, more resistant to pollution

Product size
|
Type |
SizeA inch (mm) | SizeB inch (mm) | SizeC inch (mm) | SizeD inch (mm) |
| DA-FRLE400-ADD | 40(1,016) | / | 1.125(29) | 7.9(201) |
| DA-FRLE4040-ADD | 40(1,016) | 1.05(26.7) | 0.75(19) | 3.9(99) |
Product parameters
|
Model |
ModelEffective area Ft(㎡) | Stable boron removal rate(%) | Minimum rejection rate(%) | Water yield gpd(m³/d) |
| DA-FRLE400-ADD | 400(37.2) | 99.5 | 99.3 | 11,500(44) |
| DA-FRLE4040-ADD | 85(7.9) | 99.6 | 99.4 | 2050(7.8) |
Instructions for use
| Maximum working pressure | 41 bar (600psi) | Continuous operation PH range | PH 2-10 |
| Maximum operating temperature | 45°C (113°F) | Allowable free atmosphere content | <0.1ppm |
| Maximum inlet water SDI value | 5.0 | Flow range of a single membrane element | ± 15% |
| Chemical cleaning PH range | PH 1-13 | Effective membrane area variation range | ± 3% |
| Maximum pressure drop for a single membrane element | 1.2 bar (15psi) | Time to obtain stable desalting rate | Run continuously for 24h-48h |
For more information, please call the hotline 0755-66611508 or download the technical manual.
Product Message
Related Products